When we print the total, the obvious choice is to use the current print mode. Even magazine publishers, book publishers and advertising experts when printing a large amount of material it, nothing beats that offset.

However, many people put off about the printing process, there are some demands. The printing system provides the full benefits of many of the myths that simply can not be a step back. Therefore, in order to lift the veil of the current printing, the most common myths and the real facts behind some of them:

The myth that there are cheaper, better quality recording to be made available through a theory. If it’s cheap, it’s not always practical or cheap raw materials, including product and should be considered. Current print is not the case. In fact, the largest offset printing quality prints.

The offset printers using a technique called gang-run printing, because it is one of the reasons why the offset is much cheaper. Integrate various forms of gang-run printing and print on a sheet and as a result a plate, is placed in a printing operation. This time, only a few sets of plates to print many forms, all at the same time, it helps in reducing the cost of production.

And, in the process, paper plates do not come in direct contact. The plates have a long shelf life allows. Now I have to produce new plates and plates that you can use again and again, and print your order you will be significantly less that the price of the piece.

There is some paper and ink from printed to digital, you’ll see a picture of the folding or crumpling to fall. The image is printed using the current effort. Such as digital printing ink made of a peel?

In digital printing, the ink colors you want to add a number of specific concerns, sprayed on paper. This method is not a strong bond between the paper and the ink. Why did you do that crumpled from the film of ink is easy on the chips.

Offset, on the other hand, produces colors that are still clear. Print ‘seemingly images, one after the other in the layer colors “stamp” that is produced through the rollers. This without saturating it, including the well is located on the surface of the paper.